If you are starting a do-it-yourself stair railing project using glass as the primary material, you have to be particular with the measurement. Obtaining the wrong measurement can put the entire project in jeopardy. For the glass railing system, the measurement should be exact. You have to keep in mind that every set of a stair is distinct so you have to be certain with the measurement.

In this article, we are going to discuss the proper way of obtaining proper measurements for glass stair railing. These are the following:

Overall Height

The first thing you need to obtain is the overall height, which measures the distance from the floor (landing from the stairs to the floor or at the bottom of the stairs.

Overall Length

Obtain the railing system’s overall length. To obtain the railing system’s overall length, you have to measure the distance horizontally, starting from the edge of the nosing to the bottom of the staircase and the nosing’s edge on the floor.

Nosing’s Length

When obtaining nosing length, you begin at the nosing’s top edge of the first thread going to the floor’s top edge/landing nose.

Finish Tread Depth

To check for finish tread depth measurement, you have to obtain the length of one finished tread.

Obtain the Finished Tread Height

Obtain the height of the rise starting from the base tread to the next stair’s tread.

Obtain the Stringer’s Angle

It is essential to know the stringer’s angle, especially the relevant angles necessary for stair installation. It would help a lot if you have an angle finder, but you can calculate it by trig and measurement if you don’t have that tool.

Points to Consider

Obtaining proper measurement is a must as it can significantly affect the entire glass stair railing project. Do not rush things, especially when obtaining measurement. Take your time. It will help a lot if you are going to double-check or even triple-check the measurement. As they say, it is better to be safe than sorry. Another important point to consider when obtaining measurement is to have the right measuring tools and equipment. The right tools and equipment can make a huge difference in the overall glass stair railing project. Finally, do not just memorize the figures. You have to jot it down so you can make sure you are not missing anything.

If you are not sure about what you are doing or, let’s say, you are not confident in obtaining measurements or handling the entire stair railing project; you can always ask for help from professionals. There are many professional stair railing installation services, and they work well with any type of railing material, be it glass, cables, and metals, to name a few. Always keep in mind that a DIY project can only work if you have knowledge and experience about the project. If you are unsure what you are doing, you will most likely do more harm than good. The key is to take the time, have the right tools and equipment, and obtain a proper measurement. If in doubt, ask expert’s help.

Article By Guest Post Service Network.